MASTERSTOP bentonite swelling tape 15x10 mm
from sodium bentonite; colour: black

article number 010016

The most important information at a glance

switch_to_language DE
switch_to_language GB
switch_to_language FR
switch_to_language NL
switch_to_language IT
switch_to_language ES
switch_to_language CZ
switch_to_language PL
switch_to_language RO
switch_to_language DK
switch_to_language SE
switch_to_language NO
switch_to_language FI
switch_to_language RS
switch_to_language RU
switch_to_language GR
switch_to_language TR

Go to Youtube

article number:
010016
article group:
110 - Masterstop 20x15; 20x10; 15x10 mm
GTIN:
4251689510045
customs tariff number:
40027000
packing unit:
cart
sales quantity unit:
90 m
weight per:
cart = 20.7 kg
material:

Sodium bentonite with rubber content

colour:
black
density:
1,52 g/cm³ (DIN EN ISO 1183-1)
surface:

smooth

consistency:

malleable

volume increase:

 up to 340%, in normal water (pH 7)
 up to 160%, in liquids that are highly aggressive to concrete
 up to 150%, in alkaline liquids

Substances according to the SVHC list contained or proportional weight ≥0.1%::

No

conform to REACH Guideline:

Yes

resistances:

 E.g.

  •  Alkalis in general
  •  Urea
  • Liquid manure and slurry
  • Biogas
  • Radon
  • De-icing salt
  • Substances obtained by means of fermentation
  • Substances obtained by means of composting
  • Waste water in water treatment plants

Further resistances are available on request

packaging:

size: 15 x 10 mm
90 m per carton
10 rolls of 9 m each
36 cartons per pallet

thermal scope of application:
apporx. . -30°C to +90°C
storage:
Store in undamaged and unopened original packaging in a dry place out of direct sunlight.
disposal:
Can be disposed of at municipal waste landfill sites, taking into account the local waste disposal regulations.

Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.


Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)


Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.


Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.


Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.


In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.

Status: 23.03.2022


Accessories

suitable accessories

Swelling tape adhesive

cartridge 310 ml Single-component, solvent-free sealant for bonding of MASTERSTOP bentonite swelling tapes. Usage: 40 – 50 ml/m ...

Contact us

We are happy to answer your questions

Please enter name
please_enter_company
please_enter_city
Please enter email
Please enter subject
Please enter message

Please fill the following captcha to reduce spam.

Please enter captcha.

We are not allowed to get in touch if you do not agree with our data privacy statement.