English
article number 040018
Swellable polyurethane resin for hose and crack injection.
Has low viscosity and provides a permanently elastic seal, long processing time of approx. 100 min. at 20°C
CE label
KTW (trinking water) test by Institute Gelsenkirchen
10 l container
7.5 l component A
2.5 l component B
available in large quantities
Add to notice listThe most important information at a glance
Polyurethane resin
Volume 3 : 1 (Componente A : Componente B)
Mass 100 : 42 (Componente A : Componente B)
approx. 1,05 kg/dm³ - DIN 53 479
100 mPa-s - DIN EN ISO 3219
31,474 mN/m - Krüss Processor, Tensiometer K100
100 % - DIN 53 455
1,3 - DIN EN 14406
50 - ISO 868
approx. 100 Minuten - DIN EN 1504-5
+ 6 to + 35 °C - air- substrate temperature
+ 6 to + 30 °C - materialtemperature
PROTECT CLEAN
Dont use water or aqueous cleanig agents.
7.5 l component A
2.5 l component B
10 l container
Stockable for one year at temperatures + 5 °C und + 25 °C.
may be disposed of with regular
household/commercial waste. Cartridges containing residual paste must be treated as colour waste.
Accessories
suitable accessories
for resin injection 1 piece ...
For cleaning of polyurethane and epoxy resin prior to curing. 1 l can packing group III UN 1263 ...
Similar products
You can find similar products here.
polyurethane resin for hose and crack injection PU-resin has low viscosity and provides a permanently elastic seal, long process...
Low-viscosity polyurethane-based foam Stops the water inflow immediately. Fast expansion with significant increase in volume, sat...
Contact us
We are happy to answer your questions