solid plastic sealing plug
article number 046140
The most important information at a glance
TPE
for inner diameters between 21,5 and 23 mm
approx. 70 ± 5 Shore A
Pressure watertightness
Test report MFPA Leipzig
No. : 5.1/16-412-1
JGS Assessment report
MPA Braunschweig
(1200/442/15c) - Pan dt. 28.10.2015
Fire test
Test report MFPA Leipzig
No.: PB 3.2/ 14-354-1
eg.
- Radon
- methan gas
- UV-radiation
- Ozon
- Bitumen
Further resistances are available on request
250 pcs,/ bucket
No
Yes
30 m - 3 bar
Class "E" according to DIN-EN 13501-1
Required tooling:
Hard rubber mallet: 1500 - 2000 g
Cleaning brush for tube 21.5 - 26 mm ( Art.-Nr.: 046170)
Drive-in aid ( Art.-Nr.: 046180)
Soiled distance tubes must be thoroughly cleaned before installing the STOPPER.
The entire installation area must be properly cleaned as otherwise it will not be possible to drive in the STOPPER to its final depth.
Whether using cones or lip seals, the STOPPER in can be used as the outer closure of the distance tube.
The STOPPER in is installed by driving it in with a hard rubber
mallet (weight 1500 - 2000 g) using reasonable force.
If a lip is used, the STOPPER in must be driven in so that it is flush.
!! The STOPPERS must always be driven in at both ends of the
distance tubel!!
Whether using cones or lip seals, as the outer closure of the distance tube, the STOPPER in can be driven in until it is recessed.
Please use the drive-in aid for this purpose.
Driving in the STOPPER until it is recessed not only ensures high pressure water-tightness, it also provides a neat and attractive
finish.
When driving in the second STOPPER in on the other end of the tube, it may appear that it is not possible to drive it in completely. This is due to compressed air trapped between the two STOPPERS.
If this situation occurs, simply wait and give the air time to escape before continuing to drive in the STOPPER completely.
Status: 23.03.2022
Accessories
suitable accessories
Similar products
You can find similar products here.
Inner seals for plastic and fibre cement distance tubes ...
Inner seals for plastic and fibre cement distance tubes ...
Contact us
We are happy to answer your questions