STOPPER maxi 22 with conical plate

article number 046160

STOPPER sealing plugs

plastic sealing plug

for distance tubes made of plastic or fibre cement ID 21.5 - 23 mm tested up to 4 bar Fire test, water pressure test, test for acid resistance, impact sound test

bucket 250 pcs

available in large quantities

Add to notice list

The most important information at a glance

start Animation

technical data

article number:

046160

GTIN:

4251689537929

customs tariff number:

39259080

packing unit:

Bucket

sales quantity unit:

250 Stk

weight per:

Bucket = 10 kg

material:

TPE

colour:

grey

area of application:

for inner diameters between 21,5 up to 23 mm

hardness:

approx. 70 ± 5 Shore A

test certificates/ approvals:

Pressure watertightness

Test report MFPA Leipzig

No. : PB 5.1/15-012

JGS Assessment report

MPA Braunschweig

(1200/442/15c) - Pan dt. 28.10.2015

Fire test

Test report MFPA Leipzig

No.: PB 3.2/ 14-354-1

resistances:

e.g.

Radon
methan gas
UV- radiation
Ozon
Bitumen

Further resistances are available on request

packaging:

250pcs./ bucket

thermal scope of application:

approx. -35°C up to +70°C

waterpressuretightness:

water column (m)
20 m - 2 bar

firebehavior:

Class "B2", according to DIN 4102 Teil 1

Class "E" according to DIN-EN 13501-1

storage:

In unopened, undamaged original packaging, dry and protected from direct sunlight

disposal:

Observing local authority regulations, it can be disposed of in domestic waste landﬁlls or incinerated

data sheet download

Installation tutorial

Required tooling:
Hard rubber mallet: 1500 - 2000 9
Cleaning brush for tube 21.5 - 26 mm ( Art.-Nr.: 046170)
Drive-in aid ( Art.-Nr.: 046180 )

Soiled distance tubes must be thoroughly cleaned before installing the STOPPER.
The entire installation area must be properly cleaned as otherwise it will not be possible to drive in the STOPPER to its final depth.

The STOPPER maxi can only be used as the outer closure of the distance tube if cones are used.

The STOPPER maxi is installed by driving it in with a hard rubber mallet (weight 1500 - 2000 g) using reasonable force.

The STOPPER maxi must be driven in to its full depth, i.e. flush with the concrete surface.
!! The STOPPERS must always be driven in at both ends of the distance tube !!

When driving in the second STOPPER maxi on the other end of the tube, it may appear that it is not possible to drive it in completely. This is due to compressed air trapped between the two STOPPERS.
If this situation occurs, simply wait and give the air time to escape before continuing to drive in the STOPPER into its final position.

Download installation tutorial