STOPPER in 26

article number 046163

STOPPER sealing plugs

plastic sealing plug

for distance tubes made of plastic or fibre cement ID 26 mm tested up to 4 bar Fire test, water pressure test, test for acid resistance, impact sound test

bucket 250 pieces

available in large quantities

Add to notice list

The most important information at a glance

start Animation

technical data

article number:

046163

GTIN:

4251689537936

customs tariff number:

39259080

packing unit:

Bucket

sales quantity unit:

250 Stk

weight per:

Bucket = 10 kg

material:

TPE

colour:

grey

area of application:

for tube with inner diameter 26 mm

hardness:

approx. 70 ± 5 Shore A

test certificates/ approvals:

Pressure watertightness

Test report MFPA Leipzig

No. : PB 5.1/17-140-1

JGS Assessment report

MPA Braunschweig

(1200/442/15c) - Pan dt. 28.10.2015

Fire test

Test report MFPA Leipzig

No.: PB 3.2/ 14-354-1

resistances:

e.g.

Radon
methan gas
UV- radiation
Ozon
Bitumen

Further resistances are available on request

packaging:

250pcs/ bucket

thermal scope of application:

approx. -35°C up to +70°C

waterpressuretightness:

water column (m)
20 m - 2 bar

firebehavior:

Class "B2", according to DIN 4102 Teil 1

Class "E" according to DIN-EN 13501-1

storage:

In unopened, undamaged original packaging, dry and protected from direct sunlight

disposal:

Observing local authority regulations, it can be disposed of in domestic waste landﬁlls or incinerated

data sheet download

Installation tutorial

Required tooling:
Hard rubber mallet: 1500 - 2000 g
Cleaning brush for tube 21.5 - 26 mm ( Art.-Nr.: 046170)
Drive-in aid ( Art.-Nr.: 046180)

Soiled distance tubes must be thoroughly cleaned before installing the STOPPER.
The entire installation area must be properly cleaned as otherwise it will not be possible to drive in the STOPPER to its final depth.

Whether using cones or lip seals, the STOPPER in can be used as the outer closure of the distance tube.

The STOPPER in is installed by driving it in with a hard rubber
mallet (weight 1500 - 2000 g) using reasonable force.

If a lip is used, the STOPPER in must be driven in so that it is flush.

!! The STOPPERS must always be driven in at both ends of the
distance tubel!!

Whether using cones or lip seals, as the outer closure of the distance tube, the STOPPER in can be driven in until it is recessed.
Please use the drive-in aid for this purpose.
Driving in the STOPPER until it is recessed not only ensures high pressure water-tightness, it also provides a neat and attractive
finish.

When driving in the second STOPPER in on the other end of the tube, it may appear that it is not possible to drive it in completely. This is due to compressed air trapped between the two STOPPERS.
If this situation occurs, simply wait and give the air time to escape before continuing to drive in the STOPPER completely.

Download installation tutorial