Joint sheet metal roll 160 VB1
one side fully coated

article number 070460

VB joint sheet metal in rolls

test of durability CE Water pressure test

packed in carton
width 160 mm
thickness 1,3 m
incl. 30 mounting brackets and
incl. 2 fixing clips

water pressure test by MFPA Leipzig
groundwater neutral

 

Add to notice list

The most important information at a glance

switch_to_language DE
switch_to_language GB
switch_to_language FR
switch_to_language NL
switch_to_language IT
switch_to_language ES
switch_to_language CZ
switch_to_language PL
switch_to_language RO
switch_to_language DK
switch_to_language SE
switch_to_language NO
switch_to_language FI
switch_to_language RS
switch_to_language RU
switch_to_language GR
switch_to_language TR

Go to Youtube

article number:
070460
article group:
201 - Dichtblech VB Rollen h=160 mm
GTIN:
4251689511202
customs tariff number:
73269098
packing unit:
Roll
sales quantity unit:
20 m
weight per:
Roll = 19 kg
material:

St 37, galvanized
special coating: polymer resin
fabric-reinforced

colour:
black
length of joint sheet metal:

20.00 m

height of joint sheet metal:

160 mm

thickness of joint sheet metal:

approx. 0.6 mm

thickness of special coating:

approx. 0.15 mm

 

total thickness:

approx. 0.75 mm

test certificate / approvals:

Test report PB 5.1/14-423-2
 MFPA Leipzig

suitable for zones with frequently varying water levels:

yes

corresponds to:

Utility class A for the wear classes 1 and
2 in accordance with the WU guideline

Substances according to the SVHC list contained or proportional weight ≥0.1%:

No

conform to REACH Guideline:

Yes

packaging:

carton (40 x 40 x 20 cm)
 1 roll
 2 fixing clips
30 mounting brackets


36 cartons per pallet

thermal scope of application:
- 20°C to + 90°C
waterpressuretightness:
Up to max. 8 bar (80 m water column)
storage:
Store in undamaged and unopened
original packaging in a dry place out of direct sunlight.
disposal:
Can be disposed of at municipal waste landfill sites, taking into account the local waste disposal regulations.

Remove the bottom half of the parted protective foil from the special coating.


Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.

PLEASE NOTE!! The coating of the joint sheet metal VB1 must face the waterlogged side!


The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.


To do so, the upper protective foil must be turned back in the area subsequently to be joined.


Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.


Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.


Prepared joints in the straight sections as well as the corner area.

Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.

Status: 23.03.2022


JOINT SHEET METAL in precast wall

Download DWG

Download PDF

JOINT SHEET METAL in in-situ concrete

Download DWG

Download PDF

Accessories

suitable accessories

Joint sheet metal/joint tape connector set

The joint sheet metal/joint tape connector establishes a reliable pressure water-tight connection between PVC joint tapes and coat...

Water pressure test
VB joint sheet metal VB angle 90°

prefabricated angle element 90 ° ...

Omega mounting bracket 160 mm

for coated and uncoated joint metals up to height of160 mm ...

Fixing clip h=170 mm

for securing the element joints   ...

Similar products

You can find similar products here.

Joint sheet metal roll 160 VB2

width 160 mm thickness 1,8 mm packed in carton incl. 30 mounting brackets and incl. 2 fixing clips water pressure test by MFPA Le...

test of durability CE Water pressure test
Joint sheet metal 160 VB 2-strips of 2.40 m

joint sheet metal, 160 mm wide length 2.4 m 50 pcs. per crate incl. 55 fixing clips and 150 mounting brackets water pressure test...

test of durability CE Water pressure test
MASTER joint sheet metal

40 pcs. of 2.5 m each water presure test by MFPA Leipzig   ...

Water pressure test

Contact us

We are happy to answer your questions

Please enter name
please_enter_company
please_enter_city
Please enter email
Please enter subject
Please enter message

Please fill the following captcha to reduce spam.

Please enter captcha.

We are not allowed to get in touch if you do not agree with our data privacy statement.