Joint sheet metal VB length 2 m

article number 070470

VB joint sheet in strips

joint sheet metal,
width 160 mm, length 2 m
carton: 15 strips of 2 m each
incl. 20 fixing clips and
incl. 40 mounting brackets

pallet 32 cartons = 960 m
water pressure test by MFPA Leipzig
groundwater neutral

available in large quantities

Add to notice list

The most important information at a glance

start Animation

technical data

article number:

070470

GTIN:

4251689511059

customs tariff number:

73269098

packing unit:

cart

sales quantity unit:

30 m

weight per:

cart = 30.6 kg

material:

St 37, galvanized
special coating: polymer resin
fabric-reinforced

colour:

black

length of joint sheet metal:

2.00 m

height of joint sheet metal:

160 mm

thickness of joint sheet metal:

Approx. 0.6 mm

thickness of special coating:

Approx. 0.15 mm

total thickness:

Approx. 0.9 mm

test certificate / approvals:

Test report PB 5.1/14-423-3
MFPA Leipzig

suitable for zones with frequently varying water levels:

yes

corresponds to:

Utility class A for the wear classes 1 and
2 in accordance with the WU guideline

packaging:

carton / 30m
15 strips
20 fixing clips
40 mounting brackets

32 cartons per pallet

UV weathering:

Joint sheet metal which has been installed during the first construction stage already must not be exposed to free UV weathering for more than 4 weeks until completely cast in concrete. If construction is interrupted for a prolonged period, the joint sheet metal must be especially protected against UV radiation (dark foils etc.) in order to preserve usability.

thermal scope of application:

- 20°C to + 90°C

waterpressuretightness:

Up to max. 8 bar (80 m water column)

storage:

Store in undamaged and unopened
original packaging in a dry place out of direct sunlight.

disposal:

Can be disposed of at municipal waste landfill sites, taking into account the local waste disposal regulations.

data sheet download

Installation tutorial

Remove the bottom half of the parted protective foil from the special coating.

Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.

The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.

To do so, the upper protective foil must be turned back in the area subsequently to be joined.

Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.

Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.

Prepared joints in the straight sections as well as the corner area.

Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.

Download installation tutorial

CAD Files