RONDO sealing collar RO 63 - Standard
clamping range Ø 61-64 mm

article number 090908

Sealing collar RONDO Standard

test of durability Water pressure test Radontight

RONDO sealing collars securely seal pipes and cables made of plastic, steel, fibre cement and vitrified
clay against a water column of up to 100 m (10 bar). Corrugated Pipes tested up to 30 m water column (3 bar).
The bushings in concrete foundations and walls are securely sealed against groundwater and pressurised water.

Add to notice list

The most important information at a glance

start Animation
article number:
090908
article group:
400 - Rondo Typ Standard
GTIN:
4251689517068
customs tariff number:
40169300
packing unit:
pc
sales quantity unit:
1 Stk
weight per:
pc = 0.3 kg
material:

TPE mixture

colour:
green
suitable for outer diameter:

61 - 64 mm

density:

approx. 1,17 kg/dm³

hardness:

approx. 55 ± 5 Shore A

tensile strength:

approx. 6,5 N/mm²

elongation at break:

approx. 380 %

service temperature range:

approx. -30° C bis +70° C

test certificate / approvals:

Test report
 MFPA Leipzig
 No.: PB 5.1 / 13-164

 Alkali resistance (RO 10 – RO 400)
 MPA Braunschweig
 (1200/642/15b) – Pan of 26.01.2016

 Radon tightness (RO 10 - RO 400 )
 Dr. Joachim Kemski
 2016090901d v. 19.09.2016

 

resistances:

e.g.

  •  Diluted acids (green/black)
  •  Diluted alkalis (green/black)
  •  Oil and bitumen (green)
  •  Methane gas (green)
  •  Ozone (green)

 Further resistances are available on request

Substances according to the SVHC list contained or proportional weight ≥0.1%:

No

conform to REACH Guideline:

Yes

waterpressuretightness:
10 bar (100 m water column)
3 bar (30 m water column) when installed on corrugated pipes
storage:
Store in a dry place and out of direct sunlight
disposal:
Can be disposed of at municipal waste landfill sites, taking into account the local waste disposal regulations.

The RONDO sealing collar is supplied ready-to-install with two stainless steel clamping straps for fixing.

Choose the correct size of RONDO Protect sealing collar corresponding to the outer diameterof the medium pipe to be waterproofed.


Soiled pipe walls must be cleaned prior to installing the RONDO sealing collar.
Soaking in warm water (approx. 10 minutes) makes the sealing collar even easier to install, espacially at low temperatures.
The RONDO sealing collar is pulled on from the spigot end before the pipe is installed.


The RONDO sealing collar should be mounted centrally on the wall/floor plate.
The minimum concrete cover of 5 cm must not be undercut.
The distance to the surrounding reinforcement or other components must be at least 3 cm.


Apply lubricant to the clamping range of the strap, then tighten the clamping straps sufficiently using a screwdriver to prevent the RONDO sealing collar from shifting.

During concreting, ensure thorough compacting around the RONDO sealing collar in order to prevent defects/rock pockets.


Der RONDO Sealing collar is positioned in the center of the concrete component.
It reliably and permanently prevents water penetration at the outer pipe wall.

Status: 26.07.2022


RONDO STANDARD in floor slab

Download DWG

Download PDF

RONDO STANDARD in in-situ concrete

Download DWG

Download PDF

Similar products

You can find similar products here.

MASTERSTOP SK 20x5 mm

tested by TBU Greven up to 50 m water column environmentally friendly ...

Water pressure test

Contact us

We are happy to answer your questions

Please enter name
please_enter_company
please_enter_city
Please enter email
Please enter subject
Please enter message

Please fill the following captcha to reduce spam.

Please enter captcha.

We are not allowed to get in touch if you do not agree with our data privacy statement.