inglise
MASTER EdgeBar (MEB) Ø10/100 mm
Artikli number 046201
Produktbeschreibung
MASTER EdgeBar šabloonipeatusi kasutatakse betoonplaatidel šali kiireks ja lihtsaks positsioneerimiseks.
- Kerge ja stabiilne
- Valgusbetoon halli värvi
- mitte roostetavad
- Suures osas keemiliselt vastupidav
- kiire kokkupanek
Kõige olulisem teave lühidalt
Klaaskiududega tugevdatud plastik
The course of the wall formwork is marked using a chalk line.
Using a drill bit (Ø 10 mm), drill holes flush with the previous markings. The outer diameter of the hole reflects the course of the formwork stop.
- Drilling depth at least 35 mm
- Leave drilling dust in the drill hole
- Spacing as required or according to wall formwork type
Insert the formwork stop into the drill hole and, if necessary, tap it in with light hammer blows.
Repeat steps 1-3 until the entire wall is prepared.
The wall formwork is erected. The MASTER EdgeBars serve as the inner stop for the formwork and remain in the concrete.
The wall is flush.
Updated: 26.02.2026
Küsi hinnapakkumist
Hankige selle toote kohta hinnapakkumine
Mastertec GmbH & Co. KG
Im Maintal 13
Gewerbegebiet Unterhaid
96173 Oberhaid
