angļu
MASTER EdgeBar (MEB) Ø10/100 mm
Raksta numurs 046201
Produktbeschreibung
MASTER EdgeBar veidņu ierobežotāji tiek izmantoti ātrai un vienkāršai veidņu novietošanai uz betona plātnēm.
- Viegli un stabili
- betona pelēks krāsojums
- Nerūsē
- Lielā mērā ķīmiski izturīgi
- ātra montāža
Svarīgākā informācija īsumā
Ar stikla šķiedru stiegrota plastmasa
The course of the wall formwork is marked using a chalk line.
Using a drill bit (Ø 10 mm), drill holes flush with the previous markings. The outer diameter of the hole reflects the course of the formwork stop.
- Drilling depth at least 35 mm
- Leave drilling dust in the drill hole
- Spacing as required or according to wall formwork type
Insert the formwork stop into the drill hole and, if necessary, tap it in with light hammer blows.
Repeat steps 1-3 until the entire wall is prepared.
The wall formwork is erected. The MASTER EdgeBars serve as the inner stop for the formwork and remain in the concrete.
The wall is flush.
Updated: 26.02.2026
Inserire l'angebot
Saņemiet šī produkta cenu piedāvājumu
Mastertec GmbH & Co. KG
Im Maintal 13
Gewerbegebiet Unterhaid
96173 Oberhaid
