Linkform Iepriekš noteikts plaisas elements 400 | gluda

Name: Linkform Iepriekš noteikts plaisas elements 400 | gluda
Brand: Mastertec
SKU: 070540S

SRE tips | Uzstādīšanas augstums (E izmērs): 310 - 400 mm

Raksta numurs 070540S

Linkform Iepriekš noteikts plaisas elements

LinkForm plaisu kontroles elementi tiek izmantoti kā pastāvīgie veidņu elementi būvkonstrukciju šuvēm. Uzstādīšana rada kontrolētu plaisu.

Iepriekš sagatavoti plaisas elementi tiek piegādāti gatavi uzstādīšanai.
(Pasūtot jānorāda uzstādīšanas augstums).

Saņemiet cenu piedāvājumu tagad Pievienot paziņojumu sarakstam

Piezīme: Šīs lapas saturs ir tulkots automātiski un var saturēt kļūdas. Ja rodas šaubas, lūdzu, skatiet angļu vai vācu valodas versiju vai jautājiet mūsu komandai.

Svarīgākā informācija īsumā

Tehniskie dati

Raksta numurs:

070540S

rakstu grupa:

234 - LinkFix+LinkForm Sollrisselement

GTIN:

4251689505171

muitas tarifa numurs:

73269098

iepakošanas vienība:

dators

pārdošanas daudzums vienība:

2.4 m

svars uz:

dators = 4.8 kg

materiāls:

Cinkota tērauda loksne

krāsa:

Sudrabains

glabāšana:

Uzglabāt no mitruma un mitruma

izmešana:

Var apglabāt sadzīves atkritumu apglabāšanas vietās saskaņā ar vietējiem atkritumu apglabāšanas noteikumiem.

Zīmējums ar izmēriem:

Datu lapa

Uzstādīšanas pamācība

The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.

Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.

In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.

For thicker components, the ABS stopend panel must be reinforced on site to make it statically load-bearing.

The back anchoring and securing the position of the elements against concrete pressure is carried out at the construction site.

The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS.

Status: 23.03.2022

Lejupielādēt instalēšanas pamācību