angielski
STOPPER SCREW 31 covered | 31-34 mm
Numer artykułu 046360
Zamknięcie śrubowe do punktów mocowania szalunku
- Maksymalne bezpieczeństwo przy wyjątkowym wyglądzie
- Nadaje się również do stożkowych punktów zaciskowych
- Testowane na: Woda pod ciśnieniem, dźwięk, radon
Najważniejsze informacje w skrócie
start Animacja
Śruba / nakrętka / tarcza dociskowa: Stal nierdzewna V2A
Guma uszczelniająca: elastomer termoplastyczny
Pazur: Polioksymetylen
31 do 34 mm
38,5 mm
83 mm
Scope of delivery
The STOPPER SCREW type covered is delivered ready for installation in a plastic bucket (100 pcs.). Each bucket contains 4 bits, which are attached to the inside of the lid. (Type 6: 50 pcs. and 2 bits)
Installation tools
For installation you need:
- Cleaning brush
- Cordless screwdriver
- Hammer for driving in and positioning
- Torque control tool
Preparation of tie point
Clean the inside of the tie point. Remove loose particles and dust before installation of STOPPER SCREW type covered .
1. Insertion
Insert the STOPPER SCREW type covered into the clean tie point to be sealed. To do this, position the claw of STOPPER SCREW type covered in such a way that all 4 claw ends are inside the clearance of the tie point. With a hammer blow onto the pressure plate the claw of STOPPER SCREW type covered slips into the tie point and centres itself.
2. Positioning
Push or hammer the STOPPER SCREW type covered completely into the tie point.
3. Tightening
Tighten the screw of STOPPER SCREW type covered with a cordless screwdriver. Use speed class 1.
Then tighten the screw of the STOPPER SCREW type covered with the torque wrench to a torque of 4Nm (5Nm for conical anchor holes).
With our STOPPER SCREW torque set, this step can be done more easily.
STOPPER SCREW type covered mounted in tie point with cone.
Status: 14.12.2022
Akcesoria
odpowiednie akcesoria
Mastertec GmbH & Co. KG
Im Maintal 13
Gewerbegebiet Unterhaid
96173 Oberhaid
Uzyskaj wycenę
Wycena tego produktu