Linkform Predhodno določen element razpoke 300 | gladek

Name: Linkform Predhodno določen element razpoke 300 | gladek
Brand: Mastertec
SKU: 070538S

Tip SRE | Višina vgradnje (dimenzija E): 260 - 300 mm

številka izdelka 070538S

Linkform Vnaprej določen element razpoke

Elementi za nadzor razpok LinkForm se uporabljajo kot trajni opaž za gradbene stike. Z vgradnjo nastane nadzorovana razpoka.

Vnaprej določeni elementi za razpoke so dobavljeni pripravljeni za vgradnjo.
(Pri naročilu je treba navesti višino vgradnje)

Pridobite ponudbo zdaj Dodaj na seznam obvestil

Opomba: Vsebina te strani je bila samodejno prevedena in lahko vsebuje napake. Če ste v dvomih, si oglejte angleško ali nemško različico ali vprašajte našo ekipo.

Najpomembnejše informacije na prvi pogled

Tehnični podatki

številka izdelka:

070538S

skupina člankov:

234 - LinkFix+LinkForm Sollrisselement

GTIN:

4251689505164

številka carinske tarife:

73269098

pakirna enota:

računalnik

prodajna količina enota:

2.4 m

material:

Pocinkana jeklena pločevina

barva:

Srebrni

shranjevanje:

Shranjujte stran od vlage in vlage

odstranjevanje:

Lahko se odloži na odlagališčih gospodinjskih odpadkov v skladu z lokalnimi predpisi o odlaganju odpadkov.

Risba z dimenzijami:

Podatkovni list

Navodila za namestitev

The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.

Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.

In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.

For thicker components, the ABS stopend panel must be reinforced on site to make it statically load-bearing.

The back anchoring and securing the position of the elements against concrete pressure is carried out at the construction site.

The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS.

Status: 23.03.2022

Prenos navodila za namestitev