Típus Standard (S)
cikkszám 070368
Zsaluelem kategória zsalukötés
A ciklus- vagy építési fugák tömítésénél a tömítéstechnikával szemben magas követelményeket támasztanak.
A teljesen bevonatos ABS zsaluelemek biztosítják a ciklus- vagy betonozási fugák biztonságos és tartós tömítését a nyomó és nem nyomó vízzel szemben.
A megrendeléskor meg kell adni a kívánt beépítési magasságot, hogy a lehető legjobb eredményt érjük el.
Hozzáadás a hirdetési listáhozA legfontosabb információk egy pillantásra
St 37, horganyzott
Speciális bevonat: szöveterősítésű polimer műanyag
2,50 m
160 mm
260 - 300 mm
Körülbelül 0,6 mm
Körülbelül 0,15 mm
Körülbelül 0,9 mm
Európai műszaki értékelés
Német Épületgépészeti Intézet (DIBt), Berlin
Általános építésfelügyeleti vizsgálati tanúsítvány
MFPA Leipzig
ja
A WU-irányelv szerint az 1. és 2. terhelési osztályhoz az A osztályú osztály használata
Egyszer használatos raklapokon,
Egyenként kapható, két ütőbilincs/elemmel
Nem
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Tartozékok
megfelelő tartozékok
Hasonló termékek
Hasonló termékeket itt talál.
A zsaluelem kategóriája durva illesztés A ciklus- vagy építési fugák tömítésekor a tömítéstechnikával szemben magas követelményeke...
Kapcsolatfelvétel
Szívesen válaszolunk kérdéseire