Tipo Standard (S)
numero di articolo 070301
Pannelli di chiusura ABS grezzo
Categoria di elementi di chiusura per giunti grezzi
Quando si sigillano i giunti di ciclo o di costruzione, la tecnologia di tenuta è molto esigente.
Gli elementi di chiusura in ABS completamente rivestiti assicurano che i giunti di ciclo o di costruzione siano saldamente e permanentemente sigillati contro l'acqua di pressione e non.
Per ottenere il miglior risultato possibile, al momento dell'ordine è necessario specificare l'altezza di installazione richiesta.
Aggiungi all'elenco degli avvisiLe informazioni più importanti in un colpo d'occhio
St 37, zincato
Rivestimento speciale: plastica polimerica rinforzata con tessuto
2,50 m
160 mm
810 - 900 mm
Circa 0,6 mm
Circa 0,15 mm
Circa 0,9 mm
Valutazione tecnica europea
Istituto tedesco per la tecnologia edilizia (DIBt), Berlino
Certificato di prova dell'Ispettorato generale dell'edilizia
MFPA Lipsia
ja
Utilizzare la classe A per le classi di carico 1 e 2 secondo le linee guida WU
.Su pallet usa e getta,
Disponibili singolarmente, compresi due morsetti a impatto/elemento
No
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Accessori
accessori adatti
Lastra forata larga 900 mm ...
Prodotti simili
Potete trovare prodotti simili qui.
Categoria di elementi di chiusura per giunti interbloccati La tecnologia di tenuta è molto esigente quando si tratta di sigillare ...
Contattateci
Siamo lieti di rispondere alle vostre domande