Linkform Forutbestemt sprekkeelement 200 | glatt

Name: Linkform Forutbestemt sprekkeelement 200 | glatt
Brand: Mastertec
SKU: 070534S

Type SRE | Monteringshøyde (E-dimensjon): 160 - 200 mm

Artikkelnummer 070534S

Linkform Forutbestemt sprekkeelement

LinkForm sprekkkontrollelementer brukes som permanent forskaling for konstruksjonsfuger. Installasjonen skaper en kontrollert sprekk.

De forhåndsbestemte sprekkeelementene leveres klare for montering.
(Monteringshøyde må spesifiseres ved bestilling)

Få et tilbud nå Legg til i varslingslisten

Merk: Innholdet på denne siden er oversatt automatisk og kan inneholde feil. Hvis du er i tvil, kan du se den engelske eller tyske versjonen eller spørre teamet vårt.

Den viktigste informasjonen på et øyeblikk

Tekniske data

Artikkelnummer:

070534S

artikkelgruppe:

234 - LinkFix+LinkForm Sollrisselement

GTIN:

4251689505140

tolltariffnummer:

73269098

pakkeenhet:

salgsmengde enhet:

2.4 m

vekt per:

pc = 2.4 kg

materiale:

Galvanisert stålplate

farge:

Sølvfarget

lagring:

Oppbevares beskyttet mot fukt og fuktighet

avhending:

Kan kastes på avfallsdeponier for husholdningsavfall i samsvar med lokale forskrifter for avfallshåndtering

Tegning med mål:

Datablad

Installasjonsveiledning

The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.

Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.

In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.

For thicker components, the ABS stopend panel must be reinforced on site to make it statically load-bearing.

The back anchoring and securing the position of the elements against concrete pressure is carried out at the construction site.

The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS.

Status: 23.03.2022

Last ned installasjonsveiledning