Typ Standard (S)
numer artykułu 070380
Panele ograniczające ząbkowane ABS
Kategoria elementów szalunkowych do połączeń blokowanych
Wysokie wymagania stawiane są technologii uszczelniania podczas uszczelniania połączeń cyklicznych lub konstrukcyjnych.
W pełni powlekane elementy szalunkowe ABS zapewniają, że połączenia cykliczne lub betonowe są bezpiecznie i trwale uszczelnione przed wodą wciskającą i nie wciskającą.
W celu uzyskania najlepszego możliwego rezultatu podczas zamawiania należy określić wymaganą wysokość montażu.
Do formularza zamówienia/zapytania
Dodaj do listy powiadomieńNajważniejsze informacje w skrócie
St 37, ocynkowana
Powłoka specjalna: tworzywo polimerowe wzmocnione tkaniną
2,50 m
160 mm
810 - 900 mm
Około 0,6 mm
Około 0,15 mm
Około 0,9 mm
Europejska ocena techniczna
Niemiecki Instytut Techniki Budowlanej (DIBt), Berlin
Świadectwo badań Głównego Inspektoratu Budowlanego
MFPA Leipzig
ja
Używaj klasy A dla klasy obciążenia 1 i 2 zgodnie z wytycznymi WU
Na jednorazowych paletach,
Dostępne pojedynczo, w komplecie z dwoma zaciskami udarowymi/element
Nie
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Akcesoria
odpowiednie akcesoria
Podobne produkty
Podobne produkty można znaleźć tutaj.
Kategoria elementów szalunkowych do połączeń zgrubnych Przy uszczelnianiu połączeń cyklicznych lub konstrukcyjnych stawiane są wys...
Skontaktuj się z nami
Chętnie odpowiemy na Twoje pytania