Typ Standard (S)
artikelnummer 070295
Formelement kategori grov fog
Vid tätning av cykel- eller konstruktionsfogar ställs höga krav på tätningstekniken.
De helbelagda ABS formelementen säkerställer att cykel- eller betongfogarna är säkert och permanent tätade mot tryckande och icke-tryckande vatten.
Den nödvändiga installationshöjden måste anges vid beställning för att uppnå bästa möjliga resultat.
till beställnings-/förfrågningsformuläret
Lägg till i meddelandelistanDen viktigaste informationen i en överblick
St 37, galvaniserad
.
Specialbeläggning: textilförstärkt polymerplast
2,50 m
160 mm
.510 - 600 mm
.Omkring 0,6 mm
Omkring 0,15 mm
Omkring 0,9 mm
Europeisk teknisk bedömning
Tyska institutet för byggnadsteknik (DIBt), Berlin
Testcertifikat från den allmänna byggnadsinspektionen
MFPA Leipzig
ja
Använd klass A för lastklass 1 och 2 enligt WU:s riktlinjer
På engångspallar,
Nej
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Tillbehör
lämpliga tillbehör
Perforerad arkbredd 600 mm ...
Liknande produkter
Du hittar liknande produkter här.
Formelement kategori förreglade fogar Höga krav ställs på tätningstekniken vid tätning av cykel- eller konstruktionsfogar.De helbe...
Kontakta oss
Vi svarar gärna på dina frågor