s technologií cibulových kroužků
číslo článku 120135T
Přehled nejdůležitějších informací
Těsnicí prvek: ekologická pryž EPDM
Šířka těsnění: 40 mm
Tlakové desky, šrouby, matice: V2A
Tiskové desky: stříbrné
M6
10 mm
5 Nm (rozměrově stabilní trubky pro média)
100 mm
Bez vnitřní zátky: 18 - 20 mm
1. kroužek: 21 - 25 mm
2. Kroužek: 26 - 30 mm
3. kroužek: 31 - 35 mm
3. 4. kroužek: 36 - 40 mm
4.
Pátý kroužek: 41 - 45 mm
5.
6. kroužek: 46 - 50 mm
6.
7. kroužek: 51 - 55 mm
8. kroužek: 56 - 60 mm
9. Kroužek: 61 - 65 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Kontaktujte nás
Rádi zodpovíme vaše dotazy