med løgring-teknologi
artikelnummer 120135T
De vigtigste oplysninger på et øjeblik
Tætningselement: Miljøvenlig EPDM-gummi
.
Tætningsbredde: 40 mm
Trykplader, skruer, møtrikker: V2A
Trykplader: sølvfarvet
M6
.10 mm
.5 Nm (dimensionsstabile medierør)
.100 mm
.Ohne Innenstopfen: 18 - 20 mm
1. Ring: 21 - 25 mm
2. Ring: 26 - 30 mm
3. Ring: 31 - 35 mm
4. Ring: 36 - 40 mm
5. Ring: 41 - 45 mm
6. Ring: 46 - 50 mm
7. Ring: 51 - 55 mm
8. Ring: 56 - 60 mm
9. Ring: 61 - 65 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Kontakt os
Vi svarer gerne på dine spørgsmål