z technologią pierścienia cebulowego
numer artykułu 120135T
Najważniejsze informacje w skrócie
Element uszczelniający: przyjazna dla środowiska guma EPDM
Szerokość uszczelnienia: 40 mm
Płytki dociskowe, śruby, nakrętki: V2A
Płytki drukowane: srebrne
M6
10 mm
5 Nm (stabilne wymiarowo przewody mediów)
100 mm
Bez zatyczki wewnętrznej: 18 - 20 mm
1. pierścień: 21 - 25 mm
2. Pierścień: 26 - 30 mm
3. pierścień: 31 - 35 mm
4. pierścień: 36 - 40 mm
4.
5. pierścień: 41 - 45 mm
5.
6. pierścień: 46 - 50 mm
6.
7. pierścień: 51 - 55 mm
8. pierścień: 56 - 60 mm
9. Pierścień: 61 - 65 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Skontaktuj się z nami
Chętnie odpowiemy na Twoje pytania