met uienringtechnologie
artikelnummer 120135T
De belangrijkste informatie in één oogopslag
Afdichtingselement: Milieuvriendelijk EPDM-rubber
Sealbreedte: 40mm
Drukplaten, schroeven, moeren: V2A
Drukplaten: zilverkleurig
M6
10 mm
5 Nm (vormvaste mediabuizen)
100 mm
Zonder binnenste plug: 18 - 20 mm
1e ring: 21 - 25 mm
2. Ring: 26 - 30 mm
3e ring: 31 - 35 mm
4e ring: 36 - 40 mm
4.
5e ring: 41 - 45 mm
5.
6e ring: 46 - 50 mm
6.
7. ring: 51 - 55 mm
8. ring: 56 - 60 mm
9. Ring: 61 - 65 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Contact us
We beantwoorden graag je vragen