nátrium-bentonitból
cikkszám 010012
MASTERSTOP "LONG TIME" bentonit duzzasztószalag a betonszerkezetek építési hézagainak és áthatolásainak biztonságos tömítésére a víz behatolása ellen. A víz behatolását a duzzadás és a duzzadási folyamat során kialakuló duzzadási nyomás akadályozza meg.
A MASTERSTOP LONG TIME bentonit duzzasztószalag olyan tömítés, amely vízben képes duzzadni. Finomra őrölt, erősen duzzadó agyagásványból (nátrium-bentonit) áll, kötőanyagként beágyazva egy nem vulkanizált gumi mátrixba. A jobb időjárásállóság érdekében olyan filmmel van bevonva, amely a betonban önfeloldódik. Hozzáadás a hirdetési listáhozA legfontosabb információk egy pillantásra
Nátrium-bentonit
Sima
műanyag
Normál vízben (PH 7)
340 %-ig
akár 150 % a betont erősen támadó folyadékokban
akár 290 % lúgos folyadékokban
Nem
Ja
Nem
Ja
ETA - 16 / 0735
Általános építéshatósági vizsgálati bizonyítvány (AbP), MFPA Leipzig
Száma: P-SAC 02 / 5.1 / 15-253
megközelítőleg 10 nap
a betonozás után kb. 6-7 nappal végezzük
Ja
A WU-irányelvnek megfelelően az 1. és 2. terhelési osztályhoz az A osztályt kell használni
Since the MASTERSTOP "LONG TIME" is supplied with a protective sheating, the swelling tape can
only be fastened by using a special swelling tape grid.
The substrate must be clean, dry and free of loose parts.
Apply the MASTERSTOP "LONG TIME" in the middle of the joint to the concrete surface and fix it.
The later concrete cover must be at least 8cm.
The swelling tape must be bordered by reinforcement on both sides.
Minimum distance to the reinforcement: 5cm.
Place the swelling tape grid carefully over the swelling tape without damaging the protective sheating.
The grid must only be nailed on through the side wings.
Fasten with suitable nails either by hand or mechanically with a bolt-firing tool.
The distance between nails should not exceed 25 cm in the longitudinal direction of the swelling tape.
At the beginning of the tape and if tape sections are used, pull back the protective sheating approx. 5 cm, cut off the swelling tape and fold over the extra length of sheating to prevent contact with water.
In the corners, the swelling tape grid must be released in order to ensure a continuous firm fixation on the substrate.
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should always be made in a staggered position.
Status: 23.03.2022
Tartozékok
megfelelő tartozékok
A MASTERSTOP-hez való duzzadó övrács "LONG TIME" 25/20, 1 m hosszú ...
Hossza 42 mm, nagy tárcsával ...
Hossza 40 mm tárcsával ...
Hasonló termékek
Hasonló termékeket itt talál.
Ez egy teszt...
Kapcsolatfelvétel
Szívesen válaszolunk kérdéseire