Zwelpasta op basis van polyurethaan
artikelnummer 010030
Zwellpasta op basis van polyurethaan, voor het afdichten van bouwvoegen en doorvoeringen, 310 ml patroon
Toevoegen aan kennisgevingslijstDe belangrijkste informatie in één oogopslag
Polyurethaan rubber
pasty, stabiel
ca. 360 ml/m constructievoeg
ca. 80 - 100 ml/m penetratie
approx. 6 - 7 mm / 24 hrs. at + 20 °C
Over 180%
20 +/-5
Werkende verbindingen:
Algemeen bouwtoezicht testcertificaat
P-SAC 02 / 5.1/ 17 -310 (MFPA Leipzig)
Penetraties:
Testrapport
PB 5.1 / 17-315-1 (MFPA Leipzig)
12 patronen van 310 ml / doos
Beton, staal, steen, hard PVC en nog veel meer
!!! Niet geschikt voor polypropyleen !!!
Voor droge en vochtige ondergronden
min. 9 maanden na productie
2 bar voor constructievoegen
Preparatory work:
Cutting the cartridge tips:
The use of MasterMastic PU swelling paste for construction joints or wall penetrations requires different quantities of applied material.
The area of applied material is regulated by the discharge aperture.
The nozzle is cut off to suit the various areas of application.
The following aperture sizes are necessary:
Ø 5-6 mm: Adhesive joints, e.g. swelling tapes
Ø 8-10 mm: Penetrations
Ø 13-15 mm: Construction joints
The combination of the discharge aperture and the usage volume which you can find in the technical datasheet results in the required area of application in order to guarantee professional sealing.
Sealing of penetrations:
MasterMastic PU is applied before installation of the penetration into the formwork.
The installation of the penetration into the formwork starts after complete curing of the MasterMastic PU swelling paste.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Sealing of construction joints:
After cutting off the nozzle to the necessary discharge aperture MasterMastic PU can be applied to the clean substrate.
Apply MasterMastic PU with a consistent pressure and a consistent line speed.
The concreting of the building component can only start after complete curing of the MasterMastic PU.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Status: 23.03.2022
Contact us
We beantwoorden graag je vragen