Typ Standard (S)
číslo článku 070287
Kategorie prvků pro zavírání hrubý spoj
Při utěsňování cyklických nebo stavebních spár jsou kladeny vysoké nároky na těsnicí techniku.
Celoplošně potažené bednicí prvky z ABS zajišťují bezpečné a trvalé utěsnění cyklických nebo betonářských spár proti tlakové i netlakové vodě.
Při objednávce je třeba uvést požadovanou montážní výšku, aby bylo dosaženo co nejlepšího výsledku.
na objednávkový/poptávkový formulář
Přidat do seznamu oznámeníPřehled nejdůležitějších informací
St 37, pozinkovaná
Speciální povrchová úprava: polymerní plast vyztužený tkaninou
2,50 m
160 mm
210 - 250 mm
O 0,6 mm
O 0,15 mm
O 0,9 mm
Evropské technické hodnocení
Německý institut pro stavební techniku (DIBt), Berlín
Osvědčení o zkoušce Všeobecného stavebního úřadu
MFPA Lipsko
ja
Třídu A použijte pro třídy zatížení 1 a 2 podle směrnice WU
Na jednorázových paletách,
K dostání jednotlivě, včetně dvou nárazových svorek/prvku
Ne
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Příslušenství
vhodné příslušenství
Šířka perforovaného plechu 250 mm ...
Podobné produkty
Podobné produkty najdete zde.
Kategorie uzavíracích prvků s blokovaným spojem Při utěsňování cyklických nebo stavebních spár jsou kladeny vysoké nároky na těsni...
Kontaktujte nás
Rádi zodpovíme vaše dotazy