Tipo Estándar (S)
número de artículo 070287
Elemento de encofrado categoría junta rugosa
Cuando se sellan juntas de ciclo o de construcción, se plantean grandes exigencias a la tecnología de sellado.
Los elementos de encofrado de ABS completamente revestidos garantizan que las juntas de ciclo o de hormigonado queden selladas de forma segura y permanente contra el agua de presión y no presión.
La altura de montaje requerida debe especificarse en el pedido para conseguir el mejor resultado posible.
al formulario de pedido/consulta
Añadir a la lista de avisosLa información más importante de un vistazo
St 37, galvanizado
Revestimiento especial: plástico polímero reforzado con tejido
2,50 m
160 mm
210 - 250 mm
Aproximadamente 0,6 mm
Aproximadamente 0,15 mm
Aproximadamente 0,9 mm
Evaluación técnica europea
Instituto alemán de tecnología de la construcción (DIBt), Berlín
Certificado de prueba de la inspección general de edificios
MFPA Leipzig
ja
Utilizar clase A para clase de carga 1 y 2 según la directriz WU
En paletas desechables,
Disponible individualmente, incl. dos abrazaderas de impacto/elemento
No
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Accesorios
accesorios adecuados
Ancho de chapa perforada 250 mm ...
Productos similares
Puede encontrar productos similares aquí.
Elementos de encofrado categoría junta de enclavamiento Elementos de encofrado categoría junta de enclavamiento. Al sellar juntas ...
Contacto
Estaremos encantados de responder a sus preguntas