engelsk
Fuldt belagt på begge sider
artikelnummer 070467
VB-samling af metalplader i ruller
width 120 mm
packed in carton
incl. 2 fixing clips
water pressure test by MFPA Leipzig
groundwater neutral
De vigtigste oplysninger på et øjeblik
St 37, galvaniseret
.
Speciel belægning: stofforstærket polymerplast
120 mm
.ca. 0,6 mm
ca. 0,15 mm
ca. 0,9 mm
Generelt testcertifikat fra bygningsmyndigheden (AbP)
.
MFPA Leipzig
Ja
.Brugsklasse A til belastningsklasse 1 og 2 i overensstemmelse med WU-retningslinjerne
.Nej
.Ja
.Plader, der allerede er monteret i det første betonafsnit, kan udsættes for fri UV-forvitring i højst 4 uger, indtil de er helt monteret i beton. Hvis byggearbejdet afbrydes i en længere periode, skal pladerne beskyttes specielt mod UV-stråler (mørke film osv. ...) for ikke at forringe deres anvendelighed.
Karton ( 40 x 40 x 20 cm)
1 Stck Rolle
2 Stck Stoßklammern
48 Karton pro Palette
Remove the bottom half of the parted protective foil from the special coating.
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Tilbehør
passende tilbehør
Tætningspladeforbindelsen er en enkel, hurtig og sikker måde at forbinde VB-tætningspladen eller MASTER-tætningspladen med en lodr...
Kontakt os
Vi svarer gerne på dine spørgsmål