Aan beide zijden volledig gecoat
artikelnummer 070467
width 120 mm
packed in carton
incl. 2 fixing clips
water pressure test by MFPA Leipzig
groundwater neutral
De belangrijkste informatie in één oogopslag
St 37, gegalvaniseerd
Speciale coating: weefselversterkt polymeer kunststof
120 mm
Op ongeveer 0,6 mm
Op ongeveer 0,15 mm
Op ongeveer 0,9 mm
Algemeen bouwtoezicht testcertificaat (AbP)
MFPA Leipzig
Ja
Gebruiksklasse A voor belastingsklasse 1 en 2 volgens de WU-richtlijn
Nee
Ja
De platen die al in het eerste betonneergedeelte zijn geïnstalleerd, mogen maximaal 4 weken worden blootgesteld aan vrije UV-verwering totdat ze volledig in beton zijn geïnstalleerd. Als de bouwwerkzaamheden voor een langere periode worden onderbroken, moeten de platen speciaal worden beschermd tegen UV-stralen (donkere folies enz. ...) om hun bruikbaarheid niet in het gedrang te brengen.
Karton ( 40 x 40 x 20 cm)
1 rol papier
2 stuks drukclips
48 dozen per pallet
Remove the bottom half of the parted protective foil from the special coating.
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Accessoires
passende accessoires
De afdichtbandverbinding is een eenvoudige, snelle en veilige manier om de VB-afdichtingsplaat of MASTER-afdichtingsplaat waterdic...
Contact us
We beantwoorden graag je vragen