z technologią pierścienia cebuli - wersja dzielona
numer artykułu 120193T
Najważniejsze informacje w skrócie
Element uszczelniający: przyjazna dla środowiska guma EPDM
Szerokość uszczelnienia: 40 mm
Płytki dociskowe, śruby, nakrętki: V2A
Płytki drukowane: srebrne
M6
10 mm
5 Nm (stabilne wymiarowo przewody mediów)
200 mm
Bez zatyczki wewnętrznej: 108 - 110 mm
1. pierścień: 123 - 125 mm
2. Pierścień: 138 - 140 mm
3. pierścień: 158 - 160 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Skontaktuj się z nami
Chętnie odpowiemy na Twoje pytania