Engels
met uienring technologie - gesplitste versie
artikelnummer 120193T
De belangrijkste informatie in één oogopslag
Afdichtingselement: Milieuvriendelijk EPDM-rubber
Sealbreedte: 40 mm
Drukplaten, schroeven, moeren: V2A
Drukplaten: zilverkleurig
M6
10 mm
5 Nm (vormvaste mediabuizen)
200 mm
Zonder binnenplug: 108 - 110 mm
1e ring: 123 - 125 mm
2. Ring: 138 - 140 mm
3e ring: 158 - 160 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Contact us
We beantwoorden graag je vragen