con tecnología onion ring - versión split
número de artículo 120193T
La información más importante de un vistazo
Elemento de sellado: caucho EPDM respetuoso con el medio ambiente
Anchura de sellado: 40 mm
Placas de presión, tornillos, tuercas: V2A
Placas de impresión: plateadas
M6
10 mm
5 Nm (tubos de medios estables dimensionalmente)
200 mm
Sin tapón interior: 108 - 110 mm
1er anillo: 123 - 125 mm
2. Anillo: 138 - 140 mm
3. Anillo: 158 - 160 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Contacto
Estaremos encantados de responder a sus preguntas