Oboustranně potažený ochrannou lištou
číslo článku 070200
Těsnicí fólie s přídržnou lištou pro utěsnění stavebních spár
Při utěsňování betonových stavebních spár jsou kladeny vysoké nároky na těsnicí techniku
Plně potažené těsnicí desky MASTER ve formě pásů zajišťují bezpečné a trvalé utěsnění betonových stavebních spár proti tlakové i netlakové vodě.
Přehled nejdůležitějších informací
St 37, pozinkovaná
silné, lepkavé
2,50 m
160 mm
O 0,7 mm
cca 2,5 mm
Osvědčení o zkoušce obecného stavebního úřadu (AbP)
ja
Třídu A použijte pro třídy zatížení 1 a 2 podle pokynů WU
Ne
Ja
Dřevěná krabice (255 x 30 x 25 cm)
40 proužků
45 ks svorek na tupo
pro Německo: do max. 2,0 bar (20 m vodního sloupce, zohledněn 2,5násobný bezpečnostní faktor).
The product is delivered in a wooden crate.
The MASTER joint sheet metal elements and the fixing clips are in the crate.
Remove the lower protective film
Place element on top of upper reinforcement layer
Place the MASTER joint sheet metal element in the centre of the rising wall on top of the upper reinforcement layer.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal (8 cm).
Overlap MASTER joint sheet metal by 5 cm and press together
Secure the joint with a fixing clip
Fix the element´s support rail using a tie wire.
Simply bend the element in the corner area.
If our MASTER joint sheet metal SFE adjustable is used, in the rising wall, the prefabricated MASTER joint sheet metal angle 90° must be used.
The MASTER joint sheet metal elements can be bent in any way.
Waterproofing of staggerd levels is also possible without any problems
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Příslušenství
vhodné příslušenství
Prefabrikovaný 90° rohový prvek s montážní lištou ...
Spojovací páska těsnicí fólie představuje jednoduchý, rychlý a bezpečný způsob vodotěsného připojení těsnicí fólie VB nebo těsnicí...
Profil se skládá z kovového vodního uzávěru s plnou povrchovou úpravou, který se nepropustně spojí s čerstvým betonem, a nastavite...
Profil se skládá z kovového vodního uzávěru s plnou povrchovou úpravou, který se nepropustně spojí s čerstvým betonem, a nastavite...
Podobné produkty
Podobné produkty najdete zde.
Těsnění spár betonových konstrukcí klade vysoké nároky na technologii těsnění. Jednostranně potažené těsnicí fólie těsnicí fólie v...
Kontaktujte nás
Rádi zodpovíme vaše dotazy