Totalmente revestido por ambos lados con riel de retención
número de artículo 070200
La lámina de sellado con riel de retención para sellar juntas de construcción
En el sellado de juntas de construcción de hormigón se plantean grandes exigencias a la técnica de sellado
Las planchas de sellado MASTER completamente revestidas en forma de tiras garantizan un sellado seguro y duradero de las juntas de construcción de hormigón contra el agua a presión y sin presión.
La información más importante de un vistazo
St 37, galvanizado
fuerte, pegajoso
2,50 m
160 mm
Aproximadamente 0,7 mm
aprox. 2,5 mm
Certificado de prueba de la autoridad general de la construcción (AbP)
ja
Utilizar clase A para clase de carga 1 y 2 de acuerdo con la directriz WU
No
Ja
Caja de madera (255 x 30 x 25 cm)
40 listones
45 piezas de abrazaderas a tope
para Alemania: hasta un máximo de 2,0 bares (20 m de columna de agua, teniendo en cuenta un factor de seguridad de 2,5 veces)
The product is delivered in a wooden crate.
The MASTER joint sheet metal elements and the fixing clips are in the crate.
Remove the lower protective film
Place element on top of upper reinforcement layer
Place the MASTER joint sheet metal element in the centre of the rising wall on top of the upper reinforcement layer.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal (8 cm).
Overlap MASTER joint sheet metal by 5 cm and press together
Secure the joint with a fixing clip
Fix the element´s support rail using a tie wire.
Simply bend the element in the corner area.
If our MASTER joint sheet metal SFE adjustable is used, in the rising wall, the prefabricated MASTER joint sheet metal angle 90° must be used.
The MASTER joint sheet metal elements can be bent in any way.
Waterproofing of staggerd levels is also possible without any problems
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Accesorios
accesorios adecuados
Elemento angular prefabricado de 90° con riel de montaje ...
La conexión de la cinta de unión de la lámina de sellado es una forma sencilla, rápida y segura de conectar la lámina de sellado V...
El perfil consta de un waterstop metálico totalmente revestido, que se adhiere al hormigón fresco de forma impermeable al agua, y ...
El perfil consta de un waterstop metálico totalmente revestido, que se adhiere al hormigón fresco de forma impermeable al agua, y ...
Productos similares
Puede encontrar productos similares aquí.
El sellado de juntas de construcción de hormigón plantea grandes exigencias a la tecnología de sellado. Las láminas de sellado rev...
Contacto
Estaremos encantados de responder a sus preguntas