Teljesen bevonva az egyik oldalon
cikkszám 070466
A betonszerkezeti fugák tömítése magas követelményeket támaszt a tömítési technológiával szemben.
A teljesen bevont tömítőlemezek A 160 VB tömítőlemezek biztosítják, hogy a betonszerkezeti fugák biztonságosan és tartósan tömítettek legyenek a nyomó és nem nyomó vízzel szemben.
A legfontosabb információk egy pillantásra
St 37, horganyzott
Speciális bevonat: szöveterősítésű polimer műanyag
160 mm
Körülbelül 0,6 mm
Körülbelül 0,15 mm
Körülbelül 0,75 mm
Általános építéshatósági vizsgálati bizonyítvány (AbP)
MFPA Leipzig
Ja
A WU-irányelvnek megfelelően az 1. és 2. terhelési osztályhoz az A osztályt kell használni
Nem
Ja
A már az első betonozási szakaszba beépített lemezek legfeljebb 4 hétig, a betonba történő teljes beépítésükig szabad UV időjárásnak lehetnek kitéve. Ha az építési munkálatok hosszabb időre megszakadnak, a lemezeket speciálisan védeni kell az UV-sugarak ellen (sötét fóliák stb. ...), hogy ne sérüljön a használhatóságuk.
Karton (40 x 40 x 20 cm)
1 tekercs
2 tolócsipesz
36 karton raklaponként
Műszaki alkalmazási teszt 8 barig
Remove the bottom half of the parted protective foil from the special coating.
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
PLEASE NOTE!! The coating of the joint sheet metal VB1 must face the waterlogged side!
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Tartozékok
megfelelő tartozékok
A tömítőlemez fugaszalag-csatlakozás egyszerű, gyors és biztonságos módja a VB tömítőlemez vagy a MASTER tömítőlemez vízzáró módon...
Rögzítő konzol fém vízzárókhoz 160 mm magasságig ...
Kapcsolatfelvétel
Szívesen válaszolunk kérdéseire