Completamente rivestito su un lato
numero di articolo 070466
VB lamiere di giunzione in rotoli
L'impermeabilizzazione dei giunti di costruzione in calcestruzzo pone elevati requisiti alla tecnologia di impermeabilizzazione. I fogli di tenuta completamente rivestiti Foglio di tenuta 160 VB assicurano che i giunti di costruzione in calcestruzzo siano sigillati in modo sicuro e permanente contro l'acqua di pressione e non.
Aggiungi all'elenco degli avvisiLe informazioni più importanti in un colpo d'occhio
St 37, zincato
Rivestimento speciale: plastica polimerica rinforzata con tessuto
160 mm
Circa 0,6 mm
Circa 0,15 mm
Circa 0,75 mm
Certificato di collaudo dell'autorità edilizia generale (AbP)
MFPA Lipsia
Ja
Utilizzare la classe A per le classi di carico 1 e 2 secondo le linee guida WU
.No
Ja
Le lastre già installate nella prima sezione di calcestruzzo possono essere esposte agli agenti atmosferici UV liberi per un massimo di 4 settimane fino alla completa installazione nel calcestruzzo. Se i lavori di costruzione vengono interrotti per un periodo più lungo, le lastre devono essere appositamente protette dai raggi UV (pellicole scure, ecc...) per non comprometterne l'utilizzabilità.
Cartone (40 x 40 x 20 cm)
1 rotolo
2 clip di spinta
36 cartoni per pallet
Test di applicazione tecnica fino a 8 bar
Remove the bottom half of the parted protective foil from the special coating.
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
PLEASE NOTE!! The coating of the joint sheet metal VB1 must face the waterlogged side!
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Accessori
accessori adatti
Il raccordo del nastro di tenuta è un modo semplice, rapido e sicuro per collegare il foglio di tenuta VB o il foglio di tenuta MA...
Supporto di fissaggio per i fermi di metallo fino a un'altezza di 160 mm ...
Contattateci
Siamo lieti di rispondere alle vostre domande