z technologią pierścienia cebuli - wersja dzielona
numer artykułu 120222T
Najważniejsze informacje w skrócie
Element uszczelniający: przyjazna dla środowiska guma EPDM
Szerokość uszczelnienia: 40 mm
Płytki dociskowe, śruby, nakrętki: V2A
Płytki drukowane: srebrne
M8
13 mm
10 Nm (stabilne wymiarowo przewody mediów)
250 mm
Bez zatyczki wewnętrznej: 158 - 160 mm
1. pierścień: 168 - 170 mm
2. Pierścień: 178 - 180 mm
3. pierścień: 198 - 200 mm
4. pierścień: 208 - 210 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Skontaktuj się z nami
Chętnie odpowiemy na Twoje pytania