s technologií cibulového kroužku - dělená verze
číslo článku 120222T
Přehled nejdůležitějších informací
Těsnicí prvek: ekologická pryž EPDM
Šířka těsnění: 40 mm
Tlakové desky, šrouby, matice: V2A
Tiskové desky: stříbrné
M8
13 mm
10 Nm (rozměrově stabilní trubky pro média)
250 mm
Bez vnitřní zátky: 158 - 160 mm
1. kroužek: 168 - 170 mm
2. Kroužek: 178 - 180 mm
3. kroužek: 198 - 200 mm
4. kroužek: 208 - 210 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Kontaktujte nás
Rádi zodpovíme vaše dotazy