s technológiou cibuľového krúžku - delená verzia
číslo článku 120222T
Najdôležitejšie informácie na prvý pohľad
Tesniaci prvok: ekologická guma EPDM
Šírka tesnenia: 40 mm
Tlakové dosky, skrutky, matice: V2A
Tlačové dosky: strieborné
M8
13 mm
10 Nm (rozmerovo stabilné rúrky na médiá)
250 mm
Bez vnútornej zátky: 158 - 160 mm
1. krúžok: 168 - 170 mm
2. Krúžok: 178 - 180 mm
3. krúžok: 198 - 200 mm
4. krúžok: 208 - 210 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Kontaktujte nás
Radi vám odpovieme na vaše otázky